Delphi笔试题目(1)
机械类笔试试题
1. Briefly describe what is blanking(cutting), forming, coining and
embossing in stamping process.
2. What is metal clading?
3. What is the purpose of adding glass fiber to thermoplastic material?
4. In contrast with metal and thermoplastic material,which has a higher
coefficient of thermal expansion(CTE).
5. The most suitable material for a integral hinge design (typical plastic
thickness=0.25 to 0.5mm at hinge)
6. Can a bending load makes both compressive and tensile stress in a
member?
7. What is the design criteria used in plastics catch/snap?
8. What is FEA?
9. Why is natural frequency important in vibration analysis?
10. What is the deflection equation of a cantilever beam fixed at one
edge?
EE笔试试题
1. Name 3 Vehicle Buses.
2. Name 2 possible sources of Electromagnetic interference on Electronics
Circuit ASM.
3. Wavelength for 12MHz frequency signal is____
4. Name 2 important considerations for car radio performan -ce related
to audio signal processing under multipath condition?
5. What is the typical FM receiver RF signal strength to achieve 30dB
S/N for car radio?
6. When a radio is tuned to 98.1 MHz with a LO of 108.8 MHz, what is
the image frequency?
7. For a system with a matched impedance, what is the Reflection Coefficient
and SWR?
8. Which property of the output capacitor is the primary cause of Low
Drop Out(LDO) regulator loop instability?
(1 )Equivalent series resistance(ESR)
(2 )Effective series inductance(ESL)
(3 )Capacitance value
(4 )Dielectric material
9. The switching regulator is capable of:
(1 )Higher power conversion efficiency
(2 )Providing an output voltage that is higher than the input
(3 )Generating an output boltage oppsite in polarity to the input
(4 )All of the above
10. A linear regulator op Vin(max) = 10v, Vout(min) = 4.8v, Iout(max)
= 2.5mA, Iq(max) = 2.5mA, Ta(max) = 8.5 摄氏度,The regulator is available
in 3 packages.Each package has the following thermal characteristics:
Package Rja(摄氏度/W) Rjc (摄氏度/W)
SO14 125
30
D1P8 100
52
Choose the most suitable package to handle the power dissipation requirement
without a heat sink and why.
软件笔试题
1. How do you code an infinite loop in C?
2. Volatile:
(1 )What does the keyword volatile mean? Give an example
(2 )Can a parameter be both const and volatile? Give an example
(3 )Can a pointer be volatile? Give an example
3. What are the values of a, b, and c after the following instructions:
int a=5, b=7, c;
c = a+++b;
4. What do the following declarations mean?
(1 )const int a;
(2 )int const a;
(3 )const int *a;
(4 )int * const a;
(5 )int const * a const;
5. Which of the following statements describe the use of the keyword
static?
(1 )Within the body of a function: A static variable maintains its
value between function revocations
(2 )Within a module: A static variable is accessible by all functions
within that module
(3 )Within a module: A static function can only be called by other
functions within that module
6. Embedded systems always require the user to manipulate bits in registers
or variables. Given an integer variable a, write two code fragments.
The first should set bit 5 of a. The second shnuld clear bit 5 of a.
In both cases, the remaining bits should be unmodified.
7. What does the following function return?
char foo(void)
{
unsigned int a = 6;
iht b = -20;
char c;
(a+b > 6) ? (c=1): (c=0);
return c;
}
亦凡公益图书馆(shuku.net)
下一章 回目录